Cellguard Wireless Monitoring System
Cellguard Wireless Battery Monitoring System |
 |  | Peace of Mind | | Critical power-backup systems must be ready to go the instant they are needed. When the Cellguard System Battery Monitoring Solution is on the job, they will be.
The Midtronics Cellguard System combines the latest wireless communications technology with patented, field-proven battery conductance testing for the most thorough stationary battery health analysis in the industry.
The Midtronics Cellguard Wireless Battery Monitoring System is designed for simple expansion and worldwide accessability.
Available in North America |
|
| Features | | - Continuous 24/7 online monitoring for system integrity assurance
- Full conductance, battery temperature & voltage monitoring for battery state of health analysis
- Wireless Communication Architecture ensures proper installation, easy operation, & low maintenance costs
- Intercell connection integrity monitoring ensures system effectiveness
- Economical total cost of ownership reduces installation cost, hardware price, and system maintenance
- Applies test signal to an individual cell or monoblock for high resolution of system state of health
- Web enabled communications for remote surveillance
- Full monitoring of string charge and discharge current, and discharge performance recording
- Advanced notification of battery problems via email or text message
- Conductance Advantages: safe, simple, accurate battery prognostics
- Industry choice conductance testing is the accepted standard for battery testing |
|
| Specifications | | Communications Interfaces
Ethernet 10 Mbps
RS232 or serial USB ( @ 57.6 kbps)
802.15.4 compliant RF transport @ 2.4
GHz Radio Band
Temperature
Operating Temperature
( 0 C to +65 C)
Storage Temperature
( -10 C to +80 C)
Protection
Sensor (2 V & 12 V)
Test load and power paths are fused,
PolySwitch protection for high
heat detection
Power Requirements
Base Coordinator Unit Power
Powered by 9 V DC wall plug adaptor
or powered from VTC (optional)
VTC Unit Power
Powered from the battery (< 60 mA)
2 V Sensor Power
Powered from the battery
under surveillance
12 V Sensor Power
Powered from the battery
under surveillance.
Conductance Measurement
Range
2V Sensor
100 to 15,000 Siemens
12V Sensor
100 to 4000 Siemens
Strap Resistance Measurement
2 micro Ohms minimum
Test Current
2V & 12V Sensors
Test current is approximately 5 Amps RMS
Voltage Measuring Characteristics
2V Sensor
Voltage range: 1.75 V to 2.5 V
Resolution: +/- 10 mV
12V Sensor
Voltage range: 8.7 V to 15.7 V
Resolution: +/- 20 milli Volts
Sensor Negative Battery Post
Temperature Reading
Temperature Range
( 0 C to +65 C)
Measurement Accuracy
(+/- 2 C)
String Voltage Measurement
Input Range
42 to 600 Volts DC
String Current Measurement
Float State 300 milli-Amps to 10 Amps
Charge State 10 to 200 Amps
Discharge State 10 to 200 Amps
Physical Dimensions
Base Coordinator Unit
5.08 in x 5.25 in x 2.25 in
12.9 cm x 13.3 cm x 5.7 cm
VTC String Monitor
5.08 in x 5.25 in x 2.25 in
12.9 cm x 13.3 cm x 5.7 cm
2 V & 12 V Sensor
4.45 in x 3.15 in x 1.5 in
11.3 cm x 8 cm x 3.8 cm |
|
|
|
| Overview
|
Features
|
Specifications |
| |
;)
;)
